A recent trip to Myrtle Beach yielded a bag full of gorgeous sea shells. We were pulling up handfuls of these perfect shells, and all I could think was, "These would make some pretty awesome crafts." So if you have your own collection of seaside souvenirs, take a look at what the girls and I put together, and you might find inspiration for a rainy afternoon craft of your own.
Many shells we found had a small hole in the end, just nature taking its course, I suppose. But nature's imperfections made me think that we could make some cool necklaces for the girls.
First, I wanted to make sure the shells were properly cleaned. I've read that if you don't remove the residue from the ocean (and the little critter that once lived in the shell), it could start to smell. I took a pan, filled it with water and shells, and poured some bleach in there. The ratio of water to bleach is supposed to be 50/50, but that seemed a lot to me. I just poured maybe a 1/4 cup in the large roasting pan that held the shells. Let it sit overnight, and then rinse with some dish soap and water. I've also read you can brighten the shell up by rubbing a little mineral or baby oil on it.
We bought some plastic rope at the craft store, the kind that's used to make braided lanyards. You can use leather or suede cording from the jewelry section, too, which would look nicer. The lanyard cost $0.99 for 10 yards and the jewelry cording cost $3.50 for 3 yards. We were aiming for cheap!
Measure the lanyard around your child's neck, leaving room for extra. We measured about half a yard. Thread the shell onto the lanyard - the kids have a lot of fun with this! After your shell is secure on the lanyard, tie a slip knot on each end. This allows you to easily adjust the necklace and means you don't need any special clasp.
Depending on the cording you choose, you could have a really pretty piece of jewelry, or something quick and fun for the kids to add to their dress up costumes. Either way, it's a nice way to remember a fun family vacation!
We're finishing up another shell project, which I'll feature in a few days.
Showing posts with label Crafts. Show all posts
Showing posts with label Crafts. Show all posts
Friday, July 8, 2011
Sunday, April 17, 2011
Hoppin' Down the Bunny Trail...
I'm the room mom for Bug's class, and I find the craft portion of the holiday parties sometimes perplexing. I want to do something that is fun for the kids, somewhat lasting, but easy to prepare, which was especially important after a painfully long pre-assembly process for the Christmas craft (the party was postponed until January because of snow, but after DAYS of pre-assembling the Holy Family, we were doing that Nativity craft come heck or high water).
After some searching, I found a kit online but decided that the shipping cost and delivery time were a bit outrageous. Armed with a Michael's coupon, I was able to buy the supplies cheaply and found it pretty easy to recreate!
The kids made a cute Easter Bunny magnet. It's made of craft foam, and several "daisies" stack together to create a fluffy white bunny. You could also use yellow foam and an orange foam triangle to construct a chick. These look adorable on the refrigerator, and are easy for the kids to make themselves!
Easter Bunny Magnet
1 sheet white craft foam
1 sheet pink craft foam
2 googly eyes
1 pink pom pom
1 pink pipe cleaner
magnet tape
To start, you will need to trace and cut out:
2 small daisies
1 large daisy
1 white bunny ear set
2 pink bunny ear "liners"
Cut 2 pieces of pipe cleaner approximately 2 inches long each.
Cut 1 piece of magnet tape approximately 1 inch long.
![]() |
The supplies (magnet tape not shown) |
Start by gluing the googly eyes on the smaller daisy. |
Next, glue on the pipe cleaner whiskers. Use lots of glue! Pipe cleaners require a lot of persuasion to stick properly. |
Pom pom nose comes next. |
Glue the pink portion of the ears to the larger white ears. |
Glue one small daisy to the top of another small daisy, stacked so that the bottom daisy peeks through. Glue the two small daisies to the large daisy the same way. |
Glue the bunny's face to the ears |
After the bunny is assembled, peel the backing from the magnet strip and stick to the back of the bunny ears. Wait a few hours until the bunny is completely dry, and then hang it proudly on the refrigerator!
Subscribe to:
Posts (Atom)